diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index fd47e40..4044c3c 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -169,6 +169,7 @@
 	meson-g12a-u200.dtb \
 	meson-g12a-sei510.dtb \
 	meson-g12b-odroid-n2.dtb \
+	meson-g12b-odroid-n2-plus.dtb \
 	meson-g12b-a311d-khadas-vim3.dtb \
 	meson-sm1-khadas-vim3l.dtb \
 	meson-sm1-odroid-c4.dtb \
diff --git a/arch/arm/dts/meson-axg.dtsi b/arch/arm/dts/meson-axg.dtsi
index 8e6281c..b9efc84 100644
--- a/arch/arm/dts/meson-axg.dtsi
+++ b/arch/arm/dts/meson-axg.dtsi
@@ -181,8 +181,10 @@
 			interrupt-names = "macirq";
 			clocks = <&clkc CLKID_ETH>,
 				 <&clkc CLKID_FCLK_DIV2>,
-				 <&clkc CLKID_MPLL2>;
-			clock-names = "stmmaceth", "clkin0", "clkin1";
+				 <&clkc CLKID_MPLL2>,
+				 <&clkc CLKID_FCLK_DIV2>;
+			clock-names = "stmmaceth", "clkin0", "clkin1",
+				      "timing-adjustment";
 			rx-fifo-depth = <4096>;
 			tx-fifo-depth = <2048>;
 			status = "disabled";
diff --git a/arch/arm/dts/meson-g12b-khadas-vim3.dtsi b/arch/arm/dts/meson-g12b-khadas-vim3.dtsi
index 224c890..f42cf4b 100644
--- a/arch/arm/dts/meson-g12b-khadas-vim3.dtsi
+++ b/arch/arm/dts/meson-g12b-khadas-vim3.dtsi
@@ -5,8 +5,6 @@
  * Copyright (c) 2019 Christian Hewitt <christianshewitt@gmail.com>
  */
 
-#include <dt-bindings/sound/meson-g12a-tohdmitx.h>
-
 / {
 	model = "Khadas VIM3";
 
@@ -47,69 +45,6 @@
 		regulator-boot-on;
 		regulator-always-on;
 	};
-
-	sound {
-		compatible = "amlogic,axg-sound-card";
-		model = "G12B-KHADAS-VIM3";
-		audio-aux-devs = <&tdmout_a>;
-		audio-routing = "TDMOUT_A IN 0", "FRDDR_A OUT 0",
-				"TDMOUT_A IN 1", "FRDDR_B OUT 0",
-				"TDMOUT_A IN 2", "FRDDR_C OUT 0",
-				"TDM_A Playback", "TDMOUT_A OUT";
-
-		assigned-clocks = <&clkc CLKID_MPLL2>,
-				  <&clkc CLKID_MPLL0>,
-				  <&clkc CLKID_MPLL1>;
-		assigned-clock-parents = <0>, <0>, <0>;
-		assigned-clock-rates = <294912000>,
-				       <270950400>,
-				       <393216000>;
-		status = "okay";
-
-		dai-link-0 {
-			sound-dai = <&frddr_a>;
-		};
-
-		dai-link-1 {
-			sound-dai = <&frddr_b>;
-		};
-
-		dai-link-2 {
-			sound-dai = <&frddr_c>;
-		};
-
-		/* 8ch hdmi interface */
-		dai-link-3 {
-			sound-dai = <&tdmif_a>;
-			dai-format = "i2s";
-			dai-tdm-slot-tx-mask-0 = <1 1>;
-			dai-tdm-slot-tx-mask-1 = <1 1>;
-			dai-tdm-slot-tx-mask-2 = <1 1>;
-			dai-tdm-slot-tx-mask-3 = <1 1>;
-			mclk-fs = <256>;
-
-			codec {
-				sound-dai = <&tohdmitx TOHDMITX_I2S_IN_A>;
-			};
-		};
-
-		/* hdmi glue */
-		dai-link-4 {
-			sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>;
-
-			codec {
-				sound-dai = <&hdmi_tx>;
-			};
-		};
-	};
-};
-
-&arb {
-	status = "okay";
-};
-
-&clkc_audio {
-	status = "okay";
 };
 
 &cpu0 {
@@ -154,18 +89,6 @@
 	clock-latency = <50000>;
 };
 
-&frddr_a {
-	status = "okay";
-};
-
-&frddr_b {
-	status = "okay";
-};
-
-&frddr_c {
-	status = "okay";
-};
-
 &pwm_ab {
 	pinctrl-0 = <&pwm_a_e_pins>;
 	pinctrl-names = "default";
@@ -182,14 +105,3 @@
 	status = "okay";
 };
 
-&tdmif_a {
-	status = "okay";
-};
-
-&tdmout_a {
-	status = "okay";
-};
-
-&tohdmitx {
-	status = "okay";
-};
diff --git a/arch/arm/dts/meson-g12b-odroid-n2-plus.dts b/arch/arm/dts/meson-g12b-odroid-n2-plus.dts
new file mode 100644
index 0000000..5de2815
--- /dev/null
+++ b/arch/arm/dts/meson-g12b-odroid-n2-plus.dts
@@ -0,0 +1,31 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 BayLibre, SAS
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ */
+
+/dts-v1/;
+
+/* The Amlogic S922X Rev. C supports the same OPPs as the A311D variant */
+#include "meson-g12b-a311d.dtsi"
+#include "meson-g12b-odroid-n2.dtsi"
+
+/ {
+	compatible = "hardkernel,odroid-n2-plus", "amlogic,s922x", "amlogic,g12b";
+	model = "Hardkernel ODROID-N2Plus";
+};
+
+&vddcpu_a {
+	regulator-min-microvolt = <680000>;
+	regulator-max-microvolt = <1040000>;
+
+	pwms = <&pwm_AO_cd 1 1500 0>;
+};
+
+&vddcpu_b {
+	regulator-min-microvolt = <680000>;
+	regulator-max-microvolt = <1040000>;
+
+	pwms = <&pwm_AO_cd 1 1500 0>;
+};
+
diff --git a/arch/arm/dts/meson-g12b-odroid-n2.dts b/arch/arm/dts/meson-g12b-odroid-n2.dts
index 34fffa6..a198a91 100644
--- a/arch/arm/dts/meson-g12b-odroid-n2.dts
+++ b/arch/arm/dts/meson-g12b-odroid-n2.dts
@@ -7,625 +7,9 @@
 /dts-v1/;
 
 #include "meson-g12b-s922x.dtsi"
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/gpio/meson-g12a-gpio.h>
-#include <dt-bindings/sound/meson-g12a-toacodec.h>
-#include <dt-bindings/sound/meson-g12a-tohdmitx.h>
+#include "meson-g12b-odroid-n2.dtsi"
 
 / {
 	compatible = "hardkernel,odroid-n2", "amlogic,s922x", "amlogic,g12b";
 	model = "Hardkernel ODROID-N2";
-
-	aliases {
-		serial0 = &uart_AO;
-		ethernet0 = &ethmac;
-	};
-
-	dioo2133: audio-amplifier-0 {
-		compatible = "simple-audio-amplifier";
-		enable-gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_HIGH>;
-		VCC-supply = <&vcc_5v>;
-		sound-name-prefix = "U19";
-		status = "okay";
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0x0 0x0 0x0 0x40000000>;
-	};
-
-	emmc_pwrseq: emmc-pwrseq {
-		compatible = "mmc-pwrseq-emmc";
-		reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		blue {
-			label = "n2:blue";
-			gpios = <&gpio_ao GPIOAO_11 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "heartbeat";
-		};
-	};
-
-	tflash_vdd: regulator-tflash_vdd {
-		compatible = "regulator-fixed";
-
-		regulator-name = "TFLASH_VDD";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-
-		gpio = <&gpio_ao GPIOAO_8 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-		regulator-always-on;
-	};
-
-	tf_io: gpio-regulator-tf_io {
-		compatible = "regulator-gpio";
-
-		regulator-name = "TF_IO";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <3300000>;
-
-		gpios = <&gpio_ao GPIOAO_9 GPIO_ACTIVE_HIGH>;
-		gpios-states = <0>;
-
-		states = <3300000 0>,
-			 <1800000 1>;
-	};
-
-	flash_1v8: regulator-flash_1v8 {
-		compatible = "regulator-fixed";
-		regulator-name = "FLASH_1V8";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-		vin-supply = <&vcc_3v3>;
-		regulator-always-on;
-	};
-
-	main_12v: regulator-main_12v {
-		compatible = "regulator-fixed";
-		regulator-name = "12V";
-		regulator-min-microvolt = <12000000>;
-		regulator-max-microvolt = <12000000>;
-		regulator-always-on;
-	};
-
-	vcc_5v: regulator-vcc_5v {
-		compatible = "regulator-fixed";
-		regulator-name = "5V";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		regulator-always-on;
-		vin-supply = <&main_12v>;
-	};
-
-	vcc_1v8: regulator-vcc_1v8 {
-		compatible = "regulator-fixed";
-		regulator-name = "VCC_1V8";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-		vin-supply = <&vcc_3v3>;
-		regulator-always-on;
-	};
-
-	vcc_3v3: regulator-vcc_3v3 {
-		compatible = "regulator-fixed";
-		regulator-name = "VCC_3V3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		vin-supply = <&vddao_3v3>;
-		regulator-always-on;
-		/* FIXME: actually controlled by VDDCPU_B_EN */
-	};
-
-	vddcpu_a: regulator-vddcpu-a {
-		/*
-		 * MP8756GD Regulator.
-		 */
-		compatible = "pwm-regulator";
-
-		regulator-name = "VDDCPU_A";
-		regulator-min-microvolt = <721000>;
-		regulator-max-microvolt = <1022000>;
-
-		vin-supply = <&main_12v>;
-
-		pwms = <&pwm_ab 0 1250 0>;
-		pwm-dutycycle-range = <100 0>;
-
-		regulator-boot-on;
-		regulator-always-on;
-	};
-
-	vddcpu_b: regulator-vddcpu-b {
-		/*
-		 * Silergy SY8120B1ABC Regulator.
-		 */
-		compatible = "pwm-regulator";
-
-		regulator-name = "VDDCPU_B";
-		regulator-min-microvolt = <721000>;
-		regulator-max-microvolt = <1022000>;
-
-		vin-supply = <&main_12v>;
-
-		pwms = <&pwm_AO_cd 1 1250 0>;
-		pwm-dutycycle-range = <100 0>;
-
-		regulator-boot-on;
-		regulator-always-on;
-	};
-
-	hub_5v: regulator-hub_5v {
-		compatible = "regulator-fixed";
-		regulator-name = "HUB_5V";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		vin-supply = <&vcc_5v>;
-
-		/* Connected to the Hub CHIPENABLE, LOW sets low power state */
-		gpio = <&gpio GPIOH_5 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	usb_pwr_en: regulator-usb_pwr_en {
-		compatible = "regulator-fixed";
-		regulator-name = "USB_PWR_EN";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		vin-supply = <&vcc_5v>;
-
-		/* Connected to the microUSB port power enable */
-		gpio = <&gpio GPIOH_6 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	vddao_1v8: regulator-vddao_1v8 {
-		compatible = "regulator-fixed";
-		regulator-name = "VDDAO_1V8";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-		vin-supply = <&vddao_3v3>;
-		regulator-always-on;
-	};
-
-	vddao_3v3: regulator-vddao_3v3 {
-		compatible = "regulator-fixed";
-		regulator-name = "VDDAO_3V3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		vin-supply = <&main_12v>;
-		regulator-always-on;
-	};
-
-	hdmi-connector {
-		compatible = "hdmi-connector";
-		type = "a";
-
-		port {
-			hdmi_connector_in: endpoint {
-				remote-endpoint = <&hdmi_tx_tmds_out>;
-			};
-		};
-	};
-
-	sound {
-		compatible = "amlogic,axg-sound-card";
-		model = "G12B-ODROID-N2";
-		audio-widgets = "Line", "Lineout";
-		audio-aux-devs = <&tdmout_b>, <&tdmout_c>, <&tdmin_a>,
-				 <&tdmin_b>, <&tdmin_c>, <&tdmin_lb>,
-				 <&dioo2133>;
-		audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1",
-				"TDMOUT_B IN 1", "FRDDR_B OUT 1",
-				"TDMOUT_B IN 2", "FRDDR_C OUT 1",
-				"TDM_B Playback", "TDMOUT_B OUT",
-				"TDMOUT_C IN 0", "FRDDR_A OUT 2",
-				"TDMOUT_C IN 1", "FRDDR_B OUT 2",
-				"TDMOUT_C IN 2", "FRDDR_C OUT 2",
-				"TDM_C Playback", "TDMOUT_C OUT",
-				"TDMIN_A IN 4", "TDM_B Loopback",
-				"TDMIN_B IN 4", "TDM_B Loopback",
-				"TDMIN_C IN 4", "TDM_B Loopback",
-				"TDMIN_LB IN 1", "TDM_B Loopback",
-				"TDMIN_A IN 5", "TDM_C Loopback",
-				"TDMIN_B IN 5", "TDM_C Loopback",
-				"TDMIN_C IN 5", "TDM_C Loopback",
-				"TDMIN_LB IN 2", "TDM_C Loopback",
-				"TODDR_A IN 0", "TDMIN_A OUT",
-				"TODDR_B IN 0", "TDMIN_A OUT",
-				"TODDR_C IN 0", "TDMIN_A OUT",
-				"TODDR_A IN 1", "TDMIN_B OUT",
-				"TODDR_B IN 1", "TDMIN_B OUT",
-				"TODDR_C IN 1", "TDMIN_B OUT",
-				"TODDR_A IN 2", "TDMIN_C OUT",
-				"TODDR_B IN 2", "TDMIN_C OUT",
-				"TODDR_C IN 2", "TDMIN_C OUT",
-				"TODDR_A IN 6", "TDMIN_LB OUT",
-				"TODDR_B IN 6", "TDMIN_LB OUT",
-				"TODDR_C IN 6", "TDMIN_LB OUT",
-				"U19 INL", "ACODEC LOLP",
-				"U19 INR", "ACODEC LORP",
-				"Lineout", "U19 OUTL",
-				"Lineout", "U19 OUTR";
-
-		assigned-clocks = <&clkc CLKID_MPLL2>,
-				  <&clkc CLKID_MPLL0>,
-				  <&clkc CLKID_MPLL1>;
-		assigned-clock-parents = <0>, <0>, <0>;
-		assigned-clock-rates = <294912000>,
-				       <270950400>,
-				       <393216000>;
-		status = "okay";
-
-		dai-link-0 {
-			sound-dai = <&frddr_a>;
-		};
-
-		dai-link-1 {
-			sound-dai = <&frddr_b>;
-		};
-
-		dai-link-2 {
-			sound-dai = <&frddr_c>;
-		};
-
-		dai-link-3 {
-			sound-dai = <&toddr_a>;
-		};
-
-		dai-link-4 {
-			sound-dai = <&toddr_b>;
-		};
-
-		dai-link-5 {
-			sound-dai = <&toddr_c>;
-		};
-
-		/* 8ch hdmi interface */
-		dai-link-6 {
-			sound-dai = <&tdmif_b>;
-			dai-format = "i2s";
-			dai-tdm-slot-tx-mask-0 = <1 1>;
-			dai-tdm-slot-tx-mask-1 = <1 1>;
-			dai-tdm-slot-tx-mask-2 = <1 1>;
-			dai-tdm-slot-tx-mask-3 = <1 1>;
-			mclk-fs = <256>;
-
-			codec-0 {
-				sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>;
-			};
-
-			codec-1 {
-				sound-dai = <&toacodec TOACODEC_IN_B>;
-			};
-		};
-
-		/* i2s jack output interface */
-		dai-link-7 {
-			sound-dai = <&tdmif_c>;
-			dai-format = "i2s";
-			dai-tdm-slot-tx-mask-0 = <1 1>;
-			mclk-fs = <256>;
-
-			codec-0 {
-				sound-dai = <&tohdmitx TOHDMITX_I2S_IN_C>;
-			};
-
-			codec-1 {
-				sound-dai = <&toacodec TOACODEC_IN_C>;
-			};
-		};
-
-		/* hdmi glue */
-		dai-link-8 {
-			sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>;
-
-			codec {
-				sound-dai = <&hdmi_tx>;
-			};
-		};
-
-		/* acodec glue */
-		dai-link-9 {
-			sound-dai = <&toacodec TOACODEC_OUT>;
-
-			codec {
-				sound-dai = <&acodec>;
-			};
-		};
-	};
-};
-
-&acodec {
-	AVDD-supply = <&vddao_1v8>;
-	status = "okay";
-};
-
-&arb {
-	status = "okay";
-};
-
-&cec_AO {
-	pinctrl-0 = <&cec_ao_a_h_pins>;
-	pinctrl-names = "default";
-	status = "disabled";
-	hdmi-phandle = <&hdmi_tx>;
-};
-
-&cecb_AO {
-	pinctrl-0 = <&cec_ao_b_h_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-	hdmi-phandle = <&hdmi_tx>;
-};
-
-&clkc_audio {
-	status = "okay";
-};
-
-&cpu0 {
-	cpu-supply = <&vddcpu_b>;
-	operating-points-v2 = <&cpu_opp_table_0>;
-	clocks = <&clkc CLKID_CPU_CLK>;
-	clock-latency = <50000>;
-};
-
-&cpu1 {
-	cpu-supply = <&vddcpu_b>;
-	operating-points-v2 = <&cpu_opp_table_0>;
-	clocks = <&clkc CLKID_CPU_CLK>;
-	clock-latency = <50000>;
-};
-
-&cpu100 {
-	cpu-supply = <&vddcpu_a>;
-	operating-points-v2 = <&cpub_opp_table_1>;
-	clocks = <&clkc CLKID_CPUB_CLK>;
-	clock-latency = <50000>;
-};
-
-&cpu101 {
-	cpu-supply = <&vddcpu_a>;
-	operating-points-v2 = <&cpub_opp_table_1>;
-	clocks = <&clkc CLKID_CPUB_CLK>;
-	clock-latency = <50000>;
-};
-
-&cpu102 {
-	cpu-supply = <&vddcpu_a>;
-	operating-points-v2 = <&cpub_opp_table_1>;
-	clocks = <&clkc CLKID_CPUB_CLK>;
-	clock-latency = <50000>;
-};
-
-&cpu103 {
-	cpu-supply = <&vddcpu_a>;
-	operating-points-v2 = <&cpub_opp_table_1>;
-	clocks = <&clkc CLKID_CPUB_CLK>;
-	clock-latency = <50000>;
-};
-
-&ext_mdio {
-	external_phy: ethernet-phy@0 {
-		/* Realtek RTL8211F (0x001cc916) */	
-		reg = <0>;
-		max-speed = <1000>;
-
-		reset-assert-us = <10000>;
-		reset-deassert-us = <30000>;
-		reset-gpios = <&gpio GPIOZ_15 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
-
-		interrupt-parent = <&gpio_intc>;
-		/* MAC_INTR on GPIOZ_14 */
-		interrupts = <26 IRQ_TYPE_LEVEL_LOW>;
-	};
-};
-
-&ethmac {
-	pinctrl-0 = <&eth_pins>, <&eth_rgmii_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-	phy-mode = "rgmii";
-	phy-handle = <&external_phy>;
-	amlogic,tx-delay-ns = <2>;
-};
-
-&frddr_a {
-	status = "okay";
-};
-
-&frddr_b {
-	status = "okay";
-};
-
-&frddr_c {
-	status = "okay";
-};
-
-&gpio {
-	/*
-	 * WARNING: The USB Hub on the Odroid-N2 needs a reset signal
-	 * to be turned high in order to be detected by the USB Controller
-	 * This signal should be handled by a USB specific power sequence
-	 * in order to reset the Hub when USB bus is powered down.
-	 */
-	usb-hub {
-		gpio-hog;
-		gpios = <GPIOH_4 GPIO_ACTIVE_HIGH>;
-		output-high;
-		line-name = "usb-hub-reset";
-	};
-};
-
-&hdmi_tx {
-	status = "okay";
-	pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>;
-	pinctrl-names = "default";
-	hdmi-supply = <&vcc_5v>;
-};
-
-&hdmi_tx_tmds_port {
-	hdmi_tx_tmds_out: endpoint {
-		remote-endpoint = <&hdmi_connector_in>;
-	};
-};
-
-&ir {
-	status = "okay";
-	pinctrl-0 = <&remote_input_ao_pins>;
-	pinctrl-names = "default";
-	linux,rc-map-name = "rc-odroid";
-};
-
-&pwm_ab {
-	pinctrl-0 = <&pwm_a_e_pins>;
-	pinctrl-names = "default";
-	clocks = <&xtal>;
-	clock-names = "clkin0";
-	status = "okay";
-};
-
-&pwm_AO_cd {
-	pinctrl-0 = <&pwm_ao_d_e_pins>;
-	pinctrl-names = "default";
-	clocks = <&xtal>;
-	clock-names = "clkin1";
-	status = "okay";
-};
-
-/* SD card */
-&sd_emmc_b {
-	status = "okay";
-	pinctrl-0 = <&sdcard_c_pins>;
-	pinctrl-1 = <&sdcard_clk_gate_c_pins>;
-	pinctrl-names = "default", "clk-gate";
-
-	bus-width = <4>;
-	cap-sd-highspeed;
-	max-frequency = <50000000>;
-	disable-wp;
-
-	cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>;
-	vmmc-supply = <&tflash_vdd>;
-	vqmmc-supply = <&tf_io>;
-
-};
-
-/* eMMC */
-&sd_emmc_c {
-	status = "okay";
-	pinctrl-0 = <&emmc_ctrl_pins>, <&emmc_data_8b_pins>, <&emmc_ds_pins>;
-	pinctrl-1 = <&emmc_clk_gate_pins>;
-	pinctrl-names = "default", "clk-gate";
-
-	bus-width = <8>;
-	cap-mmc-highspeed;
-	mmc-ddr-1_8v;
-	mmc-hs200-1_8v;
-	max-frequency = <200000000>;
-	disable-wp;
-
-	mmc-pwrseq = <&emmc_pwrseq>;
-	vmmc-supply = <&vcc_3v3>;
-	vqmmc-supply = <&flash_1v8>;
-};
-
-/*
- * EMMC_D4, EMMC_D5, EMMC_D6 and EMMC_D7 pins are shared between SPI NOR pins
- * and eMMC Data 4 to 7 pins.
- * Replace emmc_data_8b_pins to emmc_data_4b_pins from sd_emmc_c pinctrl-0,
- * and change bus-width to 4 then spifc can be enabled.
- * The SW1 slide should also be set to the correct position.
- */
-&spifc {
-	status = "disabled";
-	pinctrl-0 = <&nor_pins>;
-	pinctrl-names = "default";
-
-	mx25u64: spi-flash@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "mxicy,mx25u6435f", "jedec,spi-nor";
-		reg = <0>;
-		spi-max-frequency = <104000000>;
-	};
-};
-
-&tdmif_b {
-	status = "okay";
-};
-
-&tdmif_c {
-	status = "okay";
-};
-
-&tdmin_a {
-	status = "okay";
-};
-
-&tdmin_b {
-	status = "okay";
-};
-
-&tdmin_c {
-	status = "okay";
-};
-
-&tdmin_lb {
-	status = "okay";
-};
-
-&tdmout_b {
-	status = "okay";
-};
-
-&tdmout_c {
-	status = "okay";
-};
-
-&toacodec {
-	status = "okay";
-};
-
-&tohdmitx {
-	status = "okay";
-};
-
-&toddr_a {
-	status = "okay";
-};
-
-&toddr_b {
-	status = "okay";
-};
-
-&toddr_c {
-	status = "okay";
-};
-
-&uart_AO {
-	status = "okay";
-	pinctrl-0 = <&uart_ao_a_pins>;
-	pinctrl-names = "default";
-};
-
-&usb {
-	status = "okay";
-	vbus-supply = <&usb_pwr_en>;
-};
-
-&usb2_phy0 {
-	phy-supply = <&vcc_5v>;
-};
-
-&usb2_phy1 {
-	/* Enable the hub which is connected to this port */
-	phy-supply = <&hub_5v>;
 };
diff --git a/arch/arm/dts/meson-g12b-odroid-n2.dtsi b/arch/arm/dts/meson-g12b-odroid-n2.dtsi
new file mode 100644
index 0000000..6982632
--- /dev/null
+++ b/arch/arm/dts/meson-g12b-odroid-n2.dtsi
@@ -0,0 +1,625 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 BayLibre, SAS
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ */
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/meson-g12a-gpio.h>
+#include <dt-bindings/sound/meson-g12a-toacodec.h>
+#include <dt-bindings/sound/meson-g12a-tohdmitx.h>
+
+/ {
+	aliases {
+		serial0 = &uart_AO;
+		ethernet0 = &ethmac;
+	};
+
+	dioo2133: audio-amplifier-0 {
+		compatible = "simple-audio-amplifier";
+		enable-gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_HIGH>;
+		VCC-supply = <&vcc_5v>;
+		sound-name-prefix = "U19";
+		status = "okay";
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x40000000>;
+	};
+
+	emmc_pwrseq: emmc-pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		blue {
+			label = "n2:blue";
+			gpios = <&gpio_ao GPIOAO_11 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	tflash_vdd: regulator-tflash_vdd {
+		compatible = "regulator-fixed";
+
+		regulator-name = "TFLASH_VDD";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&gpio_ao GPIOAO_8 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+	};
+
+	tf_io: gpio-regulator-tf_io {
+		compatible = "regulator-gpio";
+
+		regulator-name = "TF_IO";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpios = <&gpio_ao GPIOAO_9 GPIO_ACTIVE_HIGH>;
+		gpios-states = <0>;
+
+		states = <3300000 0>,
+			 <1800000 1>;
+	};
+
+	flash_1v8: regulator-flash_1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "FLASH_1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vcc_3v3>;
+		regulator-always-on;
+	};
+
+	main_12v: regulator-main_12v {
+		compatible = "regulator-fixed";
+		regulator-name = "12V";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		regulator-always-on;
+	};
+
+	vcc_5v: regulator-vcc_5v {
+		compatible = "regulator-fixed";
+		regulator-name = "5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		vin-supply = <&main_12v>;
+	};
+
+	vcc_1v8: regulator-vcc_1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vcc_3v3>;
+		regulator-always-on;
+	};
+
+	vcc_3v3: regulator-vcc_3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vddao_3v3>;
+		regulator-always-on;
+		/* FIXME: actually controlled by VDDCPU_B_EN */
+	};
+
+	vddcpu_a: regulator-vddcpu-a {
+		/*
+		 * MP8756GD Regulator.
+		 */
+		compatible = "pwm-regulator";
+
+		regulator-name = "VDDCPU_A";
+		regulator-min-microvolt = <721000>;
+		regulator-max-microvolt = <1022000>;
+
+		vin-supply = <&main_12v>;
+
+		pwms = <&pwm_ab 0 1250 0>;
+		pwm-dutycycle-range = <100 0>;
+
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	vddcpu_b: regulator-vddcpu-b {
+		/*
+		 * Silergy SY8120B1ABC Regulator.
+		 */
+		compatible = "pwm-regulator";
+
+		regulator-name = "VDDCPU_B";
+		regulator-min-microvolt = <721000>;
+		regulator-max-microvolt = <1022000>;
+
+		vin-supply = <&main_12v>;
+
+		pwms = <&pwm_AO_cd 1 1250 0>;
+		pwm-dutycycle-range = <100 0>;
+
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	hub_5v: regulator-hub_5v {
+		compatible = "regulator-fixed";
+		regulator-name = "HUB_5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc_5v>;
+
+		/* Connected to the Hub CHIPENABLE, LOW sets low power state */
+		gpio = <&gpio GPIOH_5 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	usb_pwr_en: regulator-usb_pwr_en {
+		compatible = "regulator-fixed";
+		regulator-name = "USB_PWR_EN";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc_5v>;
+
+		/* Connected to the microUSB port power enable */
+		gpio = <&gpio GPIOH_6 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vddao_1v8: regulator-vddao_1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDAO_1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vddao_3v3>;
+		regulator-always-on;
+	};
+
+	vddao_3v3: regulator-vddao_3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDAO_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&main_12v>;
+		regulator-always-on;
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&hdmi_tx_tmds_out>;
+			};
+		};
+	};
+
+	sound {
+		compatible = "amlogic,axg-sound-card";
+		model = "G12B-ODROID-N2";
+		audio-widgets = "Line", "Lineout";
+		audio-aux-devs = <&tdmout_b>, <&tdmout_c>, <&tdmin_a>,
+				 <&tdmin_b>, <&tdmin_c>, <&tdmin_lb>,
+				 <&dioo2133>;
+		audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1",
+				"TDMOUT_B IN 1", "FRDDR_B OUT 1",
+				"TDMOUT_B IN 2", "FRDDR_C OUT 1",
+				"TDM_B Playback", "TDMOUT_B OUT",
+				"TDMOUT_C IN 0", "FRDDR_A OUT 2",
+				"TDMOUT_C IN 1", "FRDDR_B OUT 2",
+				"TDMOUT_C IN 2", "FRDDR_C OUT 2",
+				"TDM_C Playback", "TDMOUT_C OUT",
+				"TDMIN_A IN 4", "TDM_B Loopback",
+				"TDMIN_B IN 4", "TDM_B Loopback",
+				"TDMIN_C IN 4", "TDM_B Loopback",
+				"TDMIN_LB IN 1", "TDM_B Loopback",
+				"TDMIN_A IN 5", "TDM_C Loopback",
+				"TDMIN_B IN 5", "TDM_C Loopback",
+				"TDMIN_C IN 5", "TDM_C Loopback",
+				"TDMIN_LB IN 2", "TDM_C Loopback",
+				"TODDR_A IN 0", "TDMIN_A OUT",
+				"TODDR_B IN 0", "TDMIN_A OUT",
+				"TODDR_C IN 0", "TDMIN_A OUT",
+				"TODDR_A IN 1", "TDMIN_B OUT",
+				"TODDR_B IN 1", "TDMIN_B OUT",
+				"TODDR_C IN 1", "TDMIN_B OUT",
+				"TODDR_A IN 2", "TDMIN_C OUT",
+				"TODDR_B IN 2", "TDMIN_C OUT",
+				"TODDR_C IN 2", "TDMIN_C OUT",
+				"TODDR_A IN 6", "TDMIN_LB OUT",
+				"TODDR_B IN 6", "TDMIN_LB OUT",
+				"TODDR_C IN 6", "TDMIN_LB OUT",
+				"U19 INL", "ACODEC LOLP",
+				"U19 INR", "ACODEC LORP",
+				"Lineout", "U19 OUTL",
+				"Lineout", "U19 OUTR";
+
+		assigned-clocks = <&clkc CLKID_MPLL2>,
+				  <&clkc CLKID_MPLL0>,
+				  <&clkc CLKID_MPLL1>;
+		assigned-clock-parents = <0>, <0>, <0>;
+		assigned-clock-rates = <294912000>,
+				       <270950400>,
+				       <393216000>;
+		status = "okay";
+
+		dai-link-0 {
+			sound-dai = <&frddr_a>;
+		};
+
+		dai-link-1 {
+			sound-dai = <&frddr_b>;
+		};
+
+		dai-link-2 {
+			sound-dai = <&frddr_c>;
+		};
+
+		dai-link-3 {
+			sound-dai = <&toddr_a>;
+		};
+
+		dai-link-4 {
+			sound-dai = <&toddr_b>;
+		};
+
+		dai-link-5 {
+			sound-dai = <&toddr_c>;
+		};
+
+		/* 8ch hdmi interface */
+		dai-link-6 {
+			sound-dai = <&tdmif_b>;
+			dai-format = "i2s";
+			dai-tdm-slot-tx-mask-0 = <1 1>;
+			dai-tdm-slot-tx-mask-1 = <1 1>;
+			dai-tdm-slot-tx-mask-2 = <1 1>;
+			dai-tdm-slot-tx-mask-3 = <1 1>;
+			mclk-fs = <256>;
+
+			codec-0 {
+				sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>;
+			};
+
+			codec-1 {
+				sound-dai = <&toacodec TOACODEC_IN_B>;
+			};
+		};
+
+		/* i2s jack output interface */
+		dai-link-7 {
+			sound-dai = <&tdmif_c>;
+			dai-format = "i2s";
+			dai-tdm-slot-tx-mask-0 = <1 1>;
+			mclk-fs = <256>;
+
+			codec-0 {
+				sound-dai = <&tohdmitx TOHDMITX_I2S_IN_C>;
+			};
+
+			codec-1 {
+				sound-dai = <&toacodec TOACODEC_IN_C>;
+			};
+		};
+
+		/* hdmi glue */
+		dai-link-8 {
+			sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>;
+
+			codec {
+				sound-dai = <&hdmi_tx>;
+			};
+		};
+
+		/* acodec glue */
+		dai-link-9 {
+			sound-dai = <&toacodec TOACODEC_OUT>;
+
+			codec {
+				sound-dai = <&acodec>;
+			};
+		};
+	};
+};
+
+&acodec {
+	AVDD-supply = <&vddao_1v8>;
+	status = "okay";
+};
+
+&arb {
+	status = "okay";
+};
+
+&cec_AO {
+	pinctrl-0 = <&cec_ao_a_h_pins>;
+	pinctrl-names = "default";
+	status = "disabled";
+	hdmi-phandle = <&hdmi_tx>;
+};
+
+&cecb_AO {
+	pinctrl-0 = <&cec_ao_b_h_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+	hdmi-phandle = <&hdmi_tx>;
+};
+
+&clkc_audio {
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&vddcpu_b>;
+	operating-points-v2 = <&cpu_opp_table_0>;
+	clocks = <&clkc CLKID_CPU_CLK>;
+	clock-latency = <50000>;
+};
+
+&cpu1 {
+	cpu-supply = <&vddcpu_b>;
+	operating-points-v2 = <&cpu_opp_table_0>;
+	clocks = <&clkc CLKID_CPU_CLK>;
+	clock-latency = <50000>;
+};
+
+&cpu100 {
+	cpu-supply = <&vddcpu_a>;
+	operating-points-v2 = <&cpub_opp_table_1>;
+	clocks = <&clkc CLKID_CPUB_CLK>;
+	clock-latency = <50000>;
+};
+
+&cpu101 {
+	cpu-supply = <&vddcpu_a>;
+	operating-points-v2 = <&cpub_opp_table_1>;
+	clocks = <&clkc CLKID_CPUB_CLK>;
+	clock-latency = <50000>;
+};
+
+&cpu102 {
+	cpu-supply = <&vddcpu_a>;
+	operating-points-v2 = <&cpub_opp_table_1>;
+	clocks = <&clkc CLKID_CPUB_CLK>;
+	clock-latency = <50000>;
+};
+
+&cpu103 {
+	cpu-supply = <&vddcpu_a>;
+	operating-points-v2 = <&cpub_opp_table_1>;
+	clocks = <&clkc CLKID_CPUB_CLK>;
+	clock-latency = <50000>;
+};
+
+&ext_mdio {
+	external_phy: ethernet-phy@0 {
+		/* Realtek RTL8211F (0x001cc916) */	
+		reg = <0>;
+		max-speed = <1000>;
+
+		reset-assert-us = <10000>;
+		reset-deassert-us = <30000>;
+		reset-gpios = <&gpio GPIOZ_15 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
+
+		interrupt-parent = <&gpio_intc>;
+		/* MAC_INTR on GPIOZ_14 */
+		interrupts = <26 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&ethmac {
+	pinctrl-0 = <&eth_pins>, <&eth_rgmii_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+	phy-mode = "rgmii";
+	phy-handle = <&external_phy>;
+	amlogic,tx-delay-ns = <2>;
+};
+
+&frddr_a {
+	status = "okay";
+};
+
+&frddr_b {
+	status = "okay";
+};
+
+&frddr_c {
+	status = "okay";
+};
+
+&gpio {
+	/*
+	 * WARNING: The USB Hub on the Odroid-N2 needs a reset signal
+	 * to be turned high in order to be detected by the USB Controller
+	 * This signal should be handled by a USB specific power sequence
+	 * in order to reset the Hub when USB bus is powered down.
+	 */
+	usb-hub {
+		gpio-hog;
+		gpios = <GPIOH_4 GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "usb-hub-reset";
+	};
+};
+
+&hdmi_tx {
+	status = "okay";
+	pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>;
+	pinctrl-names = "default";
+	hdmi-supply = <&vcc_5v>;
+};
+
+&hdmi_tx_tmds_port {
+	hdmi_tx_tmds_out: endpoint {
+		remote-endpoint = <&hdmi_connector_in>;
+	};
+};
+
+&ir {
+	status = "okay";
+	pinctrl-0 = <&remote_input_ao_pins>;
+	pinctrl-names = "default";
+	linux,rc-map-name = "rc-odroid";
+};
+
+&pwm_ab {
+	pinctrl-0 = <&pwm_a_e_pins>;
+	pinctrl-names = "default";
+	clocks = <&xtal>;
+	clock-names = "clkin0";
+	status = "okay";
+};
+
+&pwm_AO_cd {
+	pinctrl-0 = <&pwm_ao_d_e_pins>;
+	pinctrl-names = "default";
+	clocks = <&xtal>;
+	clock-names = "clkin1";
+	status = "okay";
+};
+
+/* SD card */
+&sd_emmc_b {
+	status = "okay";
+	pinctrl-0 = <&sdcard_c_pins>;
+	pinctrl-1 = <&sdcard_clk_gate_c_pins>;
+	pinctrl-names = "default", "clk-gate";
+
+	bus-width = <4>;
+	cap-sd-highspeed;
+	max-frequency = <50000000>;
+	disable-wp;
+
+	cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&tflash_vdd>;
+	vqmmc-supply = <&tf_io>;
+
+};
+
+/* eMMC */
+&sd_emmc_c {
+	status = "okay";
+	pinctrl-0 = <&emmc_ctrl_pins>, <&emmc_data_8b_pins>, <&emmc_ds_pins>;
+	pinctrl-1 = <&emmc_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
+
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+	max-frequency = <200000000>;
+	disable-wp;
+
+	mmc-pwrseq = <&emmc_pwrseq>;
+	vmmc-supply = <&vcc_3v3>;
+	vqmmc-supply = <&flash_1v8>;
+};
+
+/*
+ * EMMC_D4, EMMC_D5, EMMC_D6 and EMMC_D7 pins are shared between SPI NOR pins
+ * and eMMC Data 4 to 7 pins.
+ * Replace emmc_data_8b_pins to emmc_data_4b_pins from sd_emmc_c pinctrl-0,
+ * and change bus-width to 4 then spifc can be enabled.
+ * The SW1 slide should also be set to the correct position.
+ */
+&spifc {
+	status = "disabled";
+	pinctrl-0 = <&nor_pins>;
+	pinctrl-names = "default";
+
+	mx25u64: spi-flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "mxicy,mx25u6435f", "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <104000000>;
+	};
+};
+
+&tdmif_b {
+	status = "okay";
+};
+
+&tdmif_c {
+	status = "okay";
+};
+
+&tdmin_a {
+	status = "okay";
+};
+
+&tdmin_b {
+	status = "okay";
+};
+
+&tdmin_c {
+	status = "okay";
+};
+
+&tdmin_lb {
+	status = "okay";
+};
+
+&tdmout_b {
+	status = "okay";
+};
+
+&tdmout_c {
+	status = "okay";
+};
+
+&toacodec {
+	status = "okay";
+};
+
+&tohdmitx {
+	status = "okay";
+};
+
+&toddr_a {
+	status = "okay";
+};
+
+&toddr_b {
+	status = "okay";
+};
+
+&toddr_c {
+	status = "okay";
+};
+
+&uart_AO {
+	status = "okay";
+	pinctrl-0 = <&uart_ao_a_pins>;
+	pinctrl-names = "default";
+};
+
+&usb {
+	status = "okay";
+	vbus-supply = <&usb_pwr_en>;
+};
+
+&usb2_phy0 {
+	phy-supply = <&vcc_5v>;
+};
+
+&usb2_phy1 {
+	/* Enable the hub which is connected to this port */
+	phy-supply = <&hub_5v>;
+};
diff --git a/arch/arm/dts/meson-gx-mali450.dtsi b/arch/arm/dts/meson-gx-mali450.dtsi
new file mode 100644
index 0000000..f9771b5
--- /dev/null
+++ b/arch/arm/dts/meson-gx-mali450.dtsi
@@ -0,0 +1,61 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2017 BayLibre SAS
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ */
+
+/ {
+	gpu_opp_table: opp-table {
+		compatible = "operating-points-v2";
+
+		opp-125000000 {
+			opp-hz = /bits/ 64 <125000000>;
+			opp-microvolt = <950000>;
+		};
+		opp-250000000 {
+			opp-hz = /bits/ 64 <250000000>;
+			opp-microvolt = <950000>;
+		};
+		opp-285714285 {
+			opp-hz = /bits/ 64 <285714285>;
+			opp-microvolt = <950000>;
+		};
+		opp-400000000 {
+			opp-hz = /bits/ 64 <400000000>;
+			opp-microvolt = <950000>;
+		};
+		opp-500000000 {
+			opp-hz = /bits/ 64 <500000000>;
+			opp-microvolt = <950000>;
+		};
+		opp-666666666 {
+			opp-hz = /bits/ 64 <666666666>;
+			opp-microvolt = <950000>;
+		};
+		opp-744000000 {
+			opp-hz = /bits/ 64 <744000000>;
+			opp-microvolt = <950000>;
+		};
+	};
+};
+
+&apb {
+	mali: gpu@c0000 {
+		compatible = "arm,mali-450";
+		reg = <0x0 0xc0000 0x0 0x40000>;
+		interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "gp", "gpmmu", "pp", "pmu",
+			"pp0", "ppmmu0", "pp1", "ppmmu1",
+			"pp2", "ppmmu2";
+		operating-points-v2 = <&gpu_opp_table>;
+	};
+};
diff --git a/arch/arm/dts/meson-gx.dtsi b/arch/arm/dts/meson-gx.dtsi
index ba63c36..0edd137 100644
--- a/arch/arm/dts/meson-gx.dtsi
+++ b/arch/arm/dts/meson-gx.dtsi
@@ -12,6 +12,7 @@
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/power/meson-gxbb-power.h>
 #include <dt-bindings/thermal/thermal.h>
 
 / {
@@ -60,7 +61,7 @@
 			compatible = "amlogic,simple-framebuffer",
 				     "simple-framebuffer";
 			amlogic,pipeline = "vpu-cvbs";
-			power-domains = <&pwrc_vpu>;
+			power-domains = <&pwrc PWRC_GXBB_VPU_ID>;
 			status = "disabled";
 		};
 
@@ -68,7 +69,7 @@
 			compatible = "amlogic,simple-framebuffer",
 				     "simple-framebuffer";
 			amlogic,pipeline = "vpu-hdmi";
-			power-domains = <&pwrc_vpu>;
+			power-domains = <&pwrc PWRC_GXBB_VPU_ID>;
 			status = "disabled";
 		};
 	};
@@ -438,12 +439,6 @@
 				compatible = "amlogic,meson-gx-ao-sysctrl", "simple-mfd", "syscon";
 				reg =  <0x0 0x0 0x0 0x100>;
 
-				pwrc_vpu: power-controller-vpu {
-					compatible = "amlogic,meson-gx-pwrc-vpu";
-					#power-domain-cells = <0>;
-					amlogic,hhi-sysctrl = <&sysctrl>;
-				};
-
 				clkc_AO: clock-controller {
 					compatible = "amlogic,meson-gx-aoclkc";
 					#clock-cells = <1>;
@@ -552,6 +547,12 @@
 			sysctrl: system-controller@0 {
 				compatible = "amlogic,meson-gx-hhi-sysctrl", "simple-mfd", "syscon";
 				reg = <0 0 0 0x400>;
+
+				pwrc: power-controller {
+					compatible = "amlogic,meson-gxbb-pwrc";
+					#power-domain-cells = <1>;
+					amlogic,ao-sysctrl = <&sysctrl_AO>;
+				};
 			};
 
 			mailbox: mailbox@404 {
@@ -574,6 +575,7 @@
 			interrupt-names = "macirq";
 			rx-fifo-depth = <4096>;
 			tx-fifo-depth = <2048>;
+			power-domains = <&pwrc PWRC_GXBB_ETHERNET_MEM_ID>;
 			status = "disabled";
 		};
 
diff --git a/arch/arm/dts/meson-gxbb.dtsi b/arch/arm/dts/meson-gxbb.dtsi
index 234490d..7c029f5 100644
--- a/arch/arm/dts/meson-gxbb.dtsi
+++ b/arch/arm/dts/meson-gxbb.dtsi
@@ -4,6 +4,7 @@
  */
 
 #include "meson-gx.dtsi"
+#include "meson-gx-mali450.dtsi"
 #include <dt-bindings/gpio/meson-gxbb-gpio.h>
 #include <dt-bindings/reset/amlogic,meson-gxbb-reset.h>
 #include <dt-bindings/clock/gxbb-clkc.h>
@@ -264,46 +265,6 @@
 	};
 };
 
-&apb {
-	mali: gpu@c0000 {
-		compatible = "amlogic,meson-gxbb-mali", "arm,mali-450";
-		reg = <0x0 0xc0000 0x0 0x40000>;
-		interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-names = "gp", "gpmmu", "pp", "pmu",
-			"pp0", "ppmmu0", "pp1", "ppmmu1",
-			"pp2", "ppmmu2";
-		clocks = <&clkc CLKID_CLK81>, <&clkc CLKID_MALI>;
-		clock-names = "bus", "core";
-
-		/*
-		 * Mali clocking is provided by two identical clock paths
-		 * MALI_0 and MALI_1 muxed to a single clock by a glitch
-		 * free mux to safely change frequency while running.
-		 */
-		assigned-clocks = <&clkc CLKID_GP0_PLL>,
-				  <&clkc CLKID_MALI_0_SEL>,
-				  <&clkc CLKID_MALI_0>,
-				  <&clkc CLKID_MALI>; /* Glitch free mux */
-		assigned-clock-parents = <0>, /* Do Nothing */
-					 <&clkc CLKID_GP0_PLL>,
-					 <0>, /* Do Nothing */
-					 <&clkc CLKID_MALI_0>;
-		assigned-clock-rates = <744000000>,
-				       <0>, /* Do Nothing */
-				       <744000000>,
-				       <0>; /* Do Nothing */
-	};
-};
-
 &cbus {
 	spifc: spi@8c80 {
 		compatible = "amlogic,meson-gxbb-spifc";
@@ -333,8 +294,9 @@
 &ethmac {
 	clocks = <&clkc CLKID_ETH>,
 		 <&clkc CLKID_FCLK_DIV2>,
-		 <&clkc CLKID_MPLL2>;
-	clock-names = "stmmaceth", "clkin0", "clkin1";
+		 <&clkc CLKID_MPLL2>,
+		 <&clkc CLKID_FCLK_DIV2>;
+	clock-names = "stmmaceth", "clkin0", "clkin1", "timing-adjustment";
 };
 
 &gpio_intc {
@@ -385,6 +347,16 @@
 	clocks = <&clkc CLKID_I2C>;
 };
 
+&mali {
+	compatible = "amlogic,meson-gxbb-mali", "arm,mali-450";
+
+	clocks = <&clkc CLKID_CLK81>, <&clkc CLKID_MALI>;
+	clock-names = "bus", "core";
+
+	assigned-clocks = <&clkc CLKID_GP0_PLL>;
+	assigned-clock-rates = <744000000>;
+};
+
 &periphs {
 	pinctrl_periphs: pinctrl@4b0 {
 		compatible = "amlogic,meson-gxbb-periphs-pinctrl";
@@ -747,7 +719,7 @@
 	};
 };
 
-&pwrc_vpu {
+&pwrc {
 	resets = <&reset RESET_VIU>,
 		 <&reset RESET_VENC>,
 		 <&reset RESET_VCBUS>,
@@ -760,6 +732,9 @@
 		 <&reset RESET_VDI6>,
 		 <&reset RESET_VENCL>,
 		 <&reset RESET_VID_LOCK>;
+	reset-names = "viu", "venc", "vcbus", "bt656",
+		      "dvin", "rdma", "venci", "vencp",
+		      "vdac", "vdi6", "vencl", "vid_lock";
 	clocks = <&clkc CLKID_VPU>,
 	         <&clkc CLKID_VAPB>;
 	clock-names = "vpu", "vapb";
@@ -866,7 +841,7 @@
 
 &vpu {
 	compatible = "amlogic,meson-gxbb-vpu", "amlogic,meson-gx-vpu";
-	power-domains = <&pwrc_vpu>;
+	power-domains = <&pwrc PWRC_GXBB_VPU_ID>;
 };
 
 &vdec {
diff --git a/arch/arm/dts/meson-gxl-mali.dtsi b/arch/arm/dts/meson-gxl-mali.dtsi
index 6aaafff..478e755 100644
--- a/arch/arm/dts/meson-gxl-mali.dtsi
+++ b/arch/arm/dts/meson-gxl-mali.dtsi
@@ -4,42 +4,14 @@
  * Author: Neil Armstrong <narmstrong@baylibre.com>
  */
 
-&apb {
-	mali: gpu@c0000 {
-		compatible = "amlogic,meson-gxl-mali", "arm,mali-450";
-		reg = <0x0 0xc0000 0x0 0x40000>;
-		interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-names = "gp", "gpmmu", "pp", "pmu",
-			"pp0", "ppmmu0", "pp1", "ppmmu1",
-			"pp2", "ppmmu2";
-		clocks = <&clkc CLKID_CLK81>, <&clkc CLKID_MALI>;
-		clock-names = "bus", "core";
+#include "meson-gx-mali450.dtsi"
 
-		/*
-		 * Mali clocking is provided by two identical clock paths
-		 * MALI_0 and MALI_1 muxed to a single clock by a glitch
-		 * free mux to safely change frequency while running.
-		 */
-		assigned-clocks = <&clkc CLKID_GP0_PLL>,
-				  <&clkc CLKID_MALI_0_SEL>,
-				  <&clkc CLKID_MALI_0>,
-				  <&clkc CLKID_MALI>; /* Glitch free mux */
-		assigned-clock-parents = <0>, /* Do Nothing */
-					 <&clkc CLKID_GP0_PLL>,
-					 <0>, /* Do Nothing */
-					 <&clkc CLKID_MALI_0>;
-		assigned-clock-rates = <744000000>,
-				       <0>, /* Do Nothing */
-				       <744000000>,
-				       <0>; /* Do Nothing */
-	};
+&mali {
+	compatible = "amlogic,meson-gxl-mali", "arm,mali-450";
+
+	clocks = <&clkc CLKID_CLK81>, <&clkc CLKID_MALI>;
+	clock-names = "bus", "core";
+
+	assigned-clocks = <&clkc CLKID_GP0_PLL>;
+	assigned-clock-rates = <744000000>;
 };
diff --git a/arch/arm/dts/meson-gxl-s805x-libretech-ac.dts b/arch/arm/dts/meson-gxl-s805x-libretech-ac.dts
index 6a226fa..9e43f4d 100644
--- a/arch/arm/dts/meson-gxl-s805x-libretech-ac.dts
+++ b/arch/arm/dts/meson-gxl-s805x-libretech-ac.dts
@@ -10,7 +10,7 @@
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/sound/meson-aiu.h>
 
-#include "meson-gxl-s905x.dtsi"
+#include "meson-gxl-s805x.dtsi"
 
 / {
 	compatible = "libretech,aml-s805x-ac", "amlogic,s805x",
diff --git a/arch/arm/dts/meson-gxl-s805x.dtsi b/arch/arm/dts/meson-gxl-s805x.dtsi
new file mode 100644
index 0000000..2997584
--- /dev/null
+++ b/arch/arm/dts/meson-gxl-s805x.dtsi
@@ -0,0 +1,23 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2020 BayLibre SAS
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ */
+
+#include "meson-gxl-s905x.dtsi"
+
+/ {
+	compatible = "amlogic,s805x", "amlogic,meson-gxl";
+};
+
+/* The S805X Package doesn't seem to handle the 744MHz OPP correctly */
+&gpu_opp_table {
+	opp-744000000 {
+		status = "disabled";
+	};
+};
+
+&mali {
+	/delete-property/ assigned-clocks;
+	/delete-property/ assigned-clock-rates;
+};
diff --git a/arch/arm/dts/meson-gxl.dtsi b/arch/arm/dts/meson-gxl.dtsi
index fc59c85..c3ac531 100644
--- a/arch/arm/dts/meson-gxl.dtsi
+++ b/arch/arm/dts/meson-gxl.dtsi
@@ -131,8 +131,9 @@
 &ethmac {
 	clocks = <&clkc CLKID_ETH>,
 		 <&clkc CLKID_FCLK_DIV2>,
-		 <&clkc CLKID_MPLL2>;
-	clock-names = "stmmaceth", "clkin0", "clkin1";
+		 <&clkc CLKID_MPLL2>,
+		 <&clkc CLKID_FCLK_DIV2>;
+	clock-names = "stmmaceth", "clkin0", "clkin1", "timing-adjustment";
 
 	mdio0: mdio {
 		#address-cells = <1>;
@@ -337,6 +338,11 @@
 	};
 };
 
+&hwrng {
+	clocks = <&clkc CLKID_RNG0>;
+	clock-names = "core";
+};
+
 &i2c_A {
 	clocks = <&clkc CLKID_I2C>;
 };
@@ -782,7 +788,7 @@
 	};
 };
 
-&pwrc_vpu {
+&pwrc {
 	resets = <&reset RESET_VIU>,
 		 <&reset RESET_VENC>,
 		 <&reset RESET_VCBUS>,
@@ -795,6 +801,9 @@
 		 <&reset RESET_VDI6>,
 		 <&reset RESET_VENCL>,
 		 <&reset RESET_VID_LOCK>;
+	reset-names = "viu", "venc", "vcbus", "bt656",
+		      "dvin", "rdma", "venci", "vencp",
+		      "vdac", "vdi6", "vencl", "vid_lock";
 	clocks = <&clkc CLKID_VPU>,
 	         <&clkc CLKID_VAPB>;
 	clock-names = "vpu", "vapb";
@@ -901,7 +910,7 @@
 
 &vpu {
 	compatible = "amlogic,meson-gxl-vpu", "amlogic,meson-gx-vpu";
-	power-domains = <&pwrc_vpu>;
+	power-domains = <&pwrc PWRC_GXBB_VPU_ID>;
 };
 
 &vdec {
diff --git a/arch/arm/dts/meson-gxm.dtsi b/arch/arm/dts/meson-gxm.dtsi
index 40e3e12..fe41451 100644
--- a/arch/arm/dts/meson-gxm.dtsi
+++ b/arch/arm/dts/meson-gxm.dtsi
@@ -82,6 +82,35 @@
 			#cooling-cells = <2>;
 		};
 	};
+
+	gpu_opp_table: opp-table {
+		compatible = "operating-points-v2";
+
+		opp-125000000 {
+			opp-hz = /bits/ 64 <125000000>;
+			opp-microvolt = <950000>;
+		};
+		opp-250000000 {
+			opp-hz = /bits/ 64 <250000000>;
+			opp-microvolt = <950000>;
+		};
+		opp-285714285 {
+			opp-hz = /bits/ 64 <285714285>;
+			opp-microvolt = <950000>;
+		};
+		opp-400000000 {
+			opp-hz = /bits/ 64 <400000000>;
+			opp-microvolt = <950000>;
+		};
+		opp-500000000 {
+			opp-hz = /bits/ 64 <500000000>;
+			opp-microvolt = <950000>;
+		};
+		opp-666666666 {
+			opp-hz = /bits/ 64 <666666666>;
+			opp-microvolt = <950000>;
+		};
+	};
 };
 
 &apb {
@@ -106,21 +135,7 @@
 		interrupt-names = "job", "mmu", "gpu";
 		clocks = <&clkc CLKID_MALI>;
 		resets = <&reset RESET_MALI_CAPB3>, <&reset RESET_MALI>;
-
-		/*
-		 * Mali clocking is provided by two identical clock paths
-		 * MALI_0 and MALI_1 muxed to a single clock by a glitch
-		 * free mux to safely change frequency while running.
-		 */
-		assigned-clocks = <&clkc CLKID_MALI_0_SEL>,
-				  <&clkc CLKID_MALI_0>,
-				  <&clkc CLKID_MALI>; /* Glitch free mux */
-		assigned-clock-parents = <&clkc CLKID_FCLK_DIV3>,
-					 <0>, /* Do Nothing */
-					 <&clkc CLKID_MALI_0>;
-		assigned-clock-rates = <0>, /* Do Nothing */
-				       <666666666>,
-				       <0>; /* Do Nothing */
+		operating-points-v2 = <&gpu_opp_table>;
 	};
 };
 
diff --git a/arch/arm/dts/meson-khadas-vim3.dtsi b/arch/arm/dts/meson-khadas-vim3.dtsi
index 94f75b4..7b46555 100644
--- a/arch/arm/dts/meson-khadas-vim3.dtsi
+++ b/arch/arm/dts/meson-khadas-vim3.dtsi
@@ -7,6 +7,7 @@
 
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/gpio/meson-g12a-gpio.h>
+#include <dt-bindings/sound/meson-g12a-tohdmitx.h>
 
 / {
 	aliases {
@@ -41,13 +42,13 @@
 
 		led-white {
 			label = "vim3:white:sys";
-			gpios = <&gpio_ao GPIOAO_4 GPIO_ACTIVE_LOW>;
+			gpios = <&gpio_ao GPIOAO_4 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "heartbeat";
 		};
 
 		led-red {
 			label = "vim3:red";
-			gpios = <&gpio_expander 5 GPIO_ACTIVE_LOW>;
+			gpios = <&gpio_expander 5 GPIO_ACTIVE_HIGH>;
 		};
 	};
 
@@ -161,6 +162,62 @@
 		};
 	};
 
+
+	sound {
+		compatible = "amlogic,axg-sound-card";
+		model = "G12B-KHADAS-VIM3";
+		audio-aux-devs = <&tdmout_a>;
+		audio-routing = "TDMOUT_A IN 0", "FRDDR_A OUT 0",
+				"TDMOUT_A IN 1", "FRDDR_B OUT 0",
+				"TDMOUT_A IN 2", "FRDDR_C OUT 0",
+				"TDM_A Playback", "TDMOUT_A OUT";
+
+		assigned-clocks = <&clkc CLKID_MPLL2>,
+				  <&clkc CLKID_MPLL0>,
+				  <&clkc CLKID_MPLL1>;
+		assigned-clock-parents = <0>, <0>, <0>;
+		assigned-clock-rates = <294912000>,
+				       <270950400>,
+				       <393216000>;
+		status = "okay";
+
+		dai-link-0 {
+			sound-dai = <&frddr_a>;
+		};
+
+		dai-link-1 {
+			sound-dai = <&frddr_b>;
+		};
+
+		dai-link-2 {
+			sound-dai = <&frddr_c>;
+		};
+
+		/* 8ch hdmi interface */
+		dai-link-3 {
+			sound-dai = <&tdmif_a>;
+			dai-format = "i2s";
+			dai-tdm-slot-tx-mask-0 = <1 1>;
+			dai-tdm-slot-tx-mask-1 = <1 1>;
+			dai-tdm-slot-tx-mask-2 = <1 1>;
+			dai-tdm-slot-tx-mask-3 = <1 1>;
+			mclk-fs = <256>;
+
+			codec {
+				sound-dai = <&tohdmitx TOHDMITX_I2S_IN_A>;
+			};
+		};
+
+		/* hdmi glue */
+		dai-link-4 {
+			sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>;
+
+			codec {
+				sound-dai = <&hdmi_tx>;
+			};
+		};
+	};
+
 	wifi32k: wifi32k {
 		compatible = "pwm-clock";
 		#clock-cells = <0>;
@@ -169,6 +226,14 @@
 	};
 };
 
+&arb {
+	status = "okay";
+};
+
+&clkc_audio {
+	status = "okay";
+};
+
 &cec_AO {
 	pinctrl-0 = <&cec_ao_a_h_pins>;
 	pinctrl-names = "default";
@@ -221,6 +286,18 @@
         amlogic,tx-delay-ns = <2>;
 };
 
+&frddr_a {
+	status = "okay";
+};
+
+&frddr_b {
+	status = "okay";
+};
+
+&frddr_c {
+	status = "okay";
+};
+
 &hdmi_tx {
 	status = "okay";
 	pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>;
@@ -368,6 +445,19 @@
 	};
 };
 
+
+&tdmif_a {
+	status = "okay";
+};
+
+&tdmout_a {
+	status = "okay";
+};
+
+&tohdmitx {
+	status = "okay";
+};
+
 &uart_A {
 	status = "okay";
 	pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
diff --git a/arch/arm/dts/meson-sm1-khadas-vim3l.dts b/arch/arm/dts/meson-sm1-khadas-vim3l.dts
index 0da56c0..4b517ca 100644
--- a/arch/arm/dts/meson-sm1-khadas-vim3l.dts
+++ b/arch/arm/dts/meson-sm1-khadas-vim3l.dts
@@ -32,69 +32,6 @@
 		regulator-boot-on;
 		regulator-always-on;
 	};
-
-	sound {
-		compatible = "amlogic,axg-sound-card";
-		model = "SM1-KHADAS-VIM3L";
-		audio-aux-devs = <&tdmout_a>;
-		audio-routing = "TDMOUT_A IN 0", "FRDDR_A OUT 0",
-				"TDMOUT_A IN 1", "FRDDR_B OUT 0",
-				"TDMOUT_A IN 2", "FRDDR_C OUT 0",
-				"TDM_A Playback", "TDMOUT_A OUT";
-
-		assigned-clocks = <&clkc CLKID_MPLL2>,
-				  <&clkc CLKID_MPLL0>,
-				  <&clkc CLKID_MPLL1>;
-		assigned-clock-parents = <0>, <0>, <0>;
-		assigned-clock-rates = <294912000>,
-				       <270950400>,
-				       <393216000>;
-		status = "okay";
-
-		dai-link-0 {
-			sound-dai = <&frddr_a>;
-		};
-
-		dai-link-1 {
-			sound-dai = <&frddr_b>;
-		};
-
-		dai-link-2 {
-			sound-dai = <&frddr_c>;
-		};
-
-		/* 8ch hdmi interface */
-		dai-link-3 {
-			sound-dai = <&tdmif_a>;
-			dai-format = "i2s";
-			dai-tdm-slot-tx-mask-0 = <1 1>;
-			dai-tdm-slot-tx-mask-1 = <1 1>;
-			dai-tdm-slot-tx-mask-2 = <1 1>;
-			dai-tdm-slot-tx-mask-3 = <1 1>;
-			mclk-fs = <256>;
-
-			codec {
-				sound-dai = <&tohdmitx TOHDMITX_I2S_IN_A>;
-			};
-		};
-
-		/* hdmi glue */
-		dai-link-4 {
-			sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>;
-
-			codec {
-				sound-dai = <&hdmi_tx>;
-			};
-		};
-	};
-};
-
-&arb {
-	status = "okay";
-};
-
-&clkc_audio {
-	status = "okay";
 };
 
 &cpu0 {
@@ -125,18 +62,6 @@
 	clock-latency = <50000>;
 };
 
-&frddr_a {
-	status = "okay";
-};
-
-&frddr_b {
-	status = "okay";
-};
-
-&frddr_c {
-	status = "okay";
-};
-
 &pwm_AO_cd {
 	pinctrl-0 = <&pwm_ao_d_e_pins>;
 	pinctrl-names = "default";
@@ -174,14 +99,3 @@
 };
  */
 
-&tdmif_a {
-	status = "okay";
-};
-
-&tdmout_a {
-	status = "okay";
-};
-
-&tohdmitx {
-	status = "okay";
-};